Setting The Value For Maintenance Due Indication - Kyocera ECOSYS M6026cdn Service Manual

Item No.
U332
1. Select the item.
2. Change the setting using the +/-keys or numeric keys.
Display
Level 1
Level 2
3. Press the start key. The value is set.
Completion
Press the stop key.
* : The screen for selecting a maintenance item No. is displayed.
U345

Setting the value for maintenance due indication

Description
Sets when to display a message notifying that the time for maintenance is about to be reached,
by setting the number of copies that can be made before the current maintenance cycle ends.
When the difference between the number of copies of the maintenance cycle and that of the
maintenance count reaches the set value, the message is displayed.
Purpose
To change the time for maintenance due indication.
Setting
1. Press the start key.
2. Select [Cnt] using the cursor up/down keys.
3. Change the setting using the cursor left/right keys.
Description
Time for maintenance due indication
(Remaining number of copies that can be made
before the current maintenance cycle ends)
4. Press the start key. The value is set.
Clearing
1. Select [Clear] using the cursor up/down keys.
2. Press the start key. The value is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Description
Low coverage threshold value
Middle coverage threshold value
1-3-36
Setting range Initial setting
0.1 to 99.8 1.0
0.2 to 99.9 2.5
Setting range Initial setting
0 to 9999 0
2PV/2PW