Power On/Off Key - Brother HL-1112 User Manual

General Information

Power On/Off key

Power On/Off key has the following functions:
Power Off

Make sure that the machine is in the Ready mode, then hold down
turn off when you enable the Power Off mode. For details about Power Off mode, see Auto Power Off
on page 46.
 Cancel printing
Cancel the current job being printed: Press and hold
eject the paper. The Error LED ( ) and Ready LED ( ) will light up alternately. Then release
Cancel all the received jobs: To delete all jobs, cancel the current job first following the procedure above.
While all the LEDs light up alternately, press
as the job(s) is being canceled.
 Error recovery
If there is an error, the machine will recover from some errors automatically. If an error is not automatically
cleared, press
 Form feed
If the Ready LED ( ) blinks for a long time, press
machine's memory.
to clear the error, and then continue to use the machine.
for about 2 seconds. All the LEDs
for about 2 seconds. The machine will then
again. All the LEDs will keep on lighting up alternately
. The machine will print any data that is left in the
3
3
.
43