Brother HL-1112 User Manual page 47

General Information
LEDs Machine Status
Data Remaining
There is print data remaining in the machine's memory. If the Ready LED ( ) is blinking for a long time
and nothing has printed, press to print the data remaining in the memory.
The Ready LED ( ) will blink at 0.5 second intervals.
3
Toner Low
The toner cartridge will need to be replaced soon. Buy a new brother toner cartridge and have it ready
for when Replace Toner is indicated.
Both the Ready ( ) and Error ( ) LEDs will turn on together, then the Error LED ( ) will turn off after 0.5
seconds and the Ready LED ( ) will turn off after 1 second, they will then both be off for a further 1
second. This procedure is repeated until the error is corrected.
If the printout is faint, hold the drum unit and toner cartridge assembly level with both hands and gently
shake it from side to side several times to spread the toner evenly inside the cartridge.
Replace Toner (Continue mode)
The machine continues printing until the LED indicates Toner Ended.
Both the Ready ( ) and Error ( ) LEDs will turn on together, then the Error LED ( ) will turn off after 0.5
seconds and the Ready LED ( ) will turn off after 1 second, they will then both be off for a further 1
second. This procedure is repeated until the error is corrected.
For details about Continue mode, see Toner Setting on page 48.
Replace Toner (Stop mode)
Replace the toner cartridge with a new one.
The Error LED ( ) will blink once at 1.5 seconds intervals.
For details about Stop mode, see Toner Setting on page 48.
(See the instructions printed on the box of the new Brother toner cartridge.)
No Toner
Remove the drum unit and toner cartridge assembly, remove the toner cartridge from the drum unit, and
reinstall the toner cartridge back into the drum unit again. Reinstall the drum unit and toner cartridge
assembly back in the machine. If the problem continues, replace the toner cartridge.
The Error LED ( ) will blink once at 1.5 seconds intervals.
Toner Ended
Replace the toner cartridge with a new one.
The Error LED ( ) will blink once at 1.5 seconds intervals.
(See the instructions printed on the box of the new Brother toner cartridge.)
Cartridge Error
The drum unit and toner cartridge assembly is not installed correctly. Take the drum unit and toner
cartridge assembly out of the machine and put it back in.
The Error LED ( ) will blink 4 times and turn off for 1 second.
39