Appliance Start Up; Install Trim And/Or Surround - Outdoor Lifestyles Twilight-II-C Installation Manual

Installation and appliance setup
Hide thumbs Also See for Twilight-II-C:
Table of Contents

Advertisement

STEP 7.
LOG #6 (SRV2005-705): Locate the notch on log #6 and place it against the front right grate tine. Set the
other end of the log so it rests on the fl at area of log #1. The orientation of log #6 in relation to the grate tine is shown
below.
3 3
5 5
2 2
Log Assembly Installed.
F. Appliance Start Up
After appliance is completely set up, replace glass
assembly (assemblies). Start the appliance and perform
a leak check using a commercially available, noncorrosive
leak check solution. Be sure to rinse off all leak check
solution following testing. Extinguish the pilot and turn
the appliance off.
G. Install Trim and/or Surround
• Install optional trim kits and/or surrounds using the
instructions included with the accessory.
• Use non-combustible materials to cover the gap between
the sheet rock and the appliance (when applicable to the
model).
Outdoor Lifestyles by Hearth & Home Technologies • Twilight-II-C Installation Manual • 2368-970 Rev. C • 2/15
Notch
Notch
4 4
1 1
6 6
Notch engaged with
Notch engaged with
grate tine.
grate tine.
4 4
3 3 2 2
5 5
2
FLAT AREA
FLAT AREA
1
1 1
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents