Brother DCP-J515W Quick Setup Manual page 31

Wireless Network
e
Please wait, it will take a few seconds for the
software to install. After the installation, this
window will appear.
Choose your machine from the list, and then
click OK.
Note
If this screen appears click OK.
Enter a name for your Macintosh in
Display Name up to 15 characters long and click
OK. Go to f.
The name you enter will appear on the machine's
LCD when you press the SCAN key and choose
a scan option. (For more information, see
Network Scanning (For models with built-in
network support) in the Software User's Guide on
the documentation CD-ROM.)
f
When this screen appears, click Next.
g
When the Brother Support screen appears,
click Close to finish the installation or go to
step 14.
Download and install
14
Presto! PageManager
(DCP-J715W only)
When Presto! PageManager is installed OCR
capability is added to Brother ControlCenter2. You
can easily scan, share and organize photos and
documents using Presto! PageManager.
a
Click the Presto! PageManager icon to go to
the Presto! PageManager download site, and
follow the on-screen instructions.
Install MFL-Pro Suite on
15
additional computers
(if needed)
If you want to use your machine with multiple
computers on the network, install MFL-Pro Suite on
each computer. Go to step 12 on page 30.
The installation is now
Finish
complete.
Note
If you specify an IP Address for the machine, you
must set the Boot Method to Static by using the
control panel. For more information, see the
Network User's Guide on the documentation
CD-ROM.
Macintosh
31