Brother DCP-J515W Quick Setup Manual page 18

Wired Network
c
Carefully guide the network cable through the
trench as shown below, following the trench
around and toward the back of the machine.
Then, connect the cable to your network.
IMPORTANT
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
Note
If both USB and LAN cables are being used,
guide both cables through the trench with one on
top of the other.
d
Lift the scanner cover to release the lock a.
Gently push the scanner cover support
down b and close the scanner cover c.
18
1
3
2
11
Install MFL-Pro Suite
a
Put the supplied installation CD-ROM into your
CD-ROM drive.
b
Double-click the Start Here OSX icon to install.
c
Choose Wired Network Connection, and
then click Next. Follow the on-screen
instructions.
d
Please wait, it will take a few seconds for the
software to install. After the installation, the
Brother software will search for the Brother
device.
e
If the machine is configured for your network,
choose the machine from the list, and then click
OK.
Macintosh