Real Time Transmission - Brother MFC-J430W User Manual

Hide thumbs Also See for MFC-J430W:
Table of Contents

Advertisement

Chapter 3
Cancelling a broadcast in progress
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Remaining Jobs.
Press OK.
The LCD will show the fax number being
dialled and the Broadcasting job
number.
d
Press OK.
The LCD will ask you the following
question:
Cancel Job?
Yes
i Press 1
No
i Press 2
e
Press 1 to cancel the fax number being
dialled.
The LCD will then show the
Broadcasting job number.
f
Press OK.
The LCD will ask you the following
question:
Cancel Job?
Yes
i Press 1
No
i Press 2
g
To cancel the broadcast, press 1.
h
Press Stop/Exit.
10

Real Time Transmission

3
When you are sending a fax, the machine will
scan the documents into the memory before
sending. Then, as soon as the telephone line
is free, the machine will start dialling and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can do
this by turning on Real Time TX.
a
Press
b
Load your document.
c
Press a or b to choose
Advanced Settings.
Press OK.
d
Press a or b to choose Real Time TX.
Press OK.
e
Press a or b to choose On (or Off).
Press OK.
f
Press Clear so you can continue
sending your fax.
Note
• If you are sending a colour fax or if the
memory is full and you are sending a
mono fax from the ADF, the machine will
send the document in real time (even if
Real Time TX is set to Off).
• In Real Time Transmission, the automatic
redial feature does not work when you are
using the scanner glass.
(FAX).
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-j432w

Table of Contents