Sleep Mode; Lcd Display; Lcd Contrast; Setting The Dim Timer For The Backlight - Brother MFC-J430W User Manual

Hide thumbs Also See for MFC-J430W:
Table of Contents

Advertisement

Chapter 1

Sleep Mode

You can choose how long the machine will
remain idle (up to 60 minutes) before it goes
into Sleep Mode. The timer will restart if any
operation is carried out on the machine.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Sleep Mode.
Press OK.
d
Press a or b to choose 1Min, 2Mins,
3Mins, 5Mins, 10Mins, 30Mins or
60Mins to choose which is the length of
time the machine is idle before entering
sleep mode.
Press OK.
e
Press Stop/Exit.
2

LCD display

1

LCD Contrast

You can adjust the LCD contrast. If you are
having difficulty reading the LCD, try
changing the contrast setting.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose LCD Settings.
Press OK.
d
Press a or b to choose LCD Contrast.
Press OK.
e
Press d to increase the contrast or press
c to decrease the contrast.
Press OK.
f
Press Stop/Exit.
Setting the Dim Timer for the
backlight
You can set how long the LCD backlight stays
on after the last key press.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose LCD Settings.
Press OK.
d
Press a or b to choose Dim Timer.
Press OK.
e
Press a or b to choose 10Secs,
20Secs, 30Secs or Off.
Press OK.
f
Press Stop/Exit.
1
1
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-j432w

Table of Contents