2: Connecting An Antenna/Cable/Vcr - Sony Bravia KDL-70R550A Operating Instructions Manual

• Fix the TV to the Table-Top Stand according to
the arrow marks
using the supplied screws.
• This TV is very heavy, so two or more people
should place the TV onto the Table-Top Stand.
• If using an electric screwdriver, set the
tightening torque at approximately 1.5 N·m {15
kgf·cm}.
• Keep the TV in a vertical position while
tightening the screws. Be sure to securely
tighten the supplied screws, otherwise the TV
may fall down.
• Use an appropriate screwdriver to attach the
screws tightly without damaging the screw
head.
• Please ensure the AC power cord is away from
the Table-Top Stand installation location when
you attach Table-Top Stand.
• When detaching the Table-Top Stand, reverse
the attaching procedure. Do not remove any
screws other than those used when attaching
the Table-Top Stand.
6
that guide the screw holes
2: Connecting an
antenna/cable/
VCR
• Connecting cables are not supplied.
Connecting an antenna/cable
Antenna cable
Connecting an antenna/cable and VCR
AV cable
VCR
Antenna
cable
Antenna cable