3D Settings
You can make the following settings from the 3D Settings menu.
Press HOME, then select "Settings" > "Picture" > "3D Settings".
Auto 3D:
Select "On" then 3D picture is automatically displayed when a 3D signal is detected.
• The display mode does not change to 3D mode automatically, depending on the signal source or format. In this
case, select 3D display mode manually.
3D Signal Notification:
Select "On" then a message is displayed when a 3D signal is detected.
3D Supported Video Format
input
Frame Packing
HDMI
Side by Side
Side by Side
MHL
Side by Side
USB
• Depends on the MHL device, 3D display might be not displayed.
• See page 28 for the supported USB video format.
22
3D Format
1920 × 1080p
1920 × 1080i
1280 × 720p
1920 × 1080p
1920 × 1080i
1280 × 720p
1920 × 1080p
Over-Under
1920 × 1080i
1280 × 720p
1920 × 1080p
1920 × 1080i
1280 × 720p
1920 × 1080p
Over-Under
1920 × 1080i
1280 × 720p
1920 × 1080p
1920 × 1080i
1280 × 720p
1920 × 1080p
Over-Under
1920 × 1080i
1280 × 720p
Signal
Resolution
Vertical Frequency (Hz)
24, 30
50, 60
24, 30, 50, 60
24, 50, 60
50, 60
50, 60
24, 30, 50, 60
50, 60
50, 60
24
50, 60
50, 60
24, 30
50, 60
50, 60
24, 25, 30
50, 60
24, 25, 30, 50, 60
24, 25, 30
50, 60
24, 25, 30, 50, 60