Connecting An Antenna/Cable Tv System With A Vcr; Connecting To An S Video Equipped; Vcr - Sony Trinitron KV-29RS26C Operating Instructions Manual

Connecting and Installing the TV (continued)
Connecting an anten_na/cable TV
system with a VCR
1
Attach the coaxial connector from your
cable-or antenna to IN on your VCR.
2 Using AUDIO/VIDEO connectors, connect
AUDIO and VIDEO OUT on your VCR to
AUDIO and VIDEO IN on your TV
(Yellow-VIDEO, White-AUDIO Left, Red-
AUDIO Right).*
3 Using a coaxial connector, connect ou;£ on
your VCR to VHF/UHF on your TV.
Connecting to an S Videoequipped
VCR (for optimum picture quality)
1
Attach the coaxial connector from your
cable or antenna to IN on your VCR.
2 Using AUDIO connectors, connect AUDIO
OUT on your VCR to AUDIO IN on your TV
(White-AUDIO Left, Red-AUDIO Right).*
3 Using a coaxial connector, connect OUT on
yourVCR to VHF/UHF on your TV.
4 Using an S VIDEO connector, connect
S VIDEO on your VCR to S VIDEO on
your TV. .
* If you are connecting a monaural VCR, connect only
the single audio output to the leftinput on your TV.
Disconnect all power sources before making any connections.
I VCR must be connected and turned on to operate PIP I
(KV.27$26, 271126,29R$26, 29RS26C, 29V66M,32S26,
I
32714/26, 321/26, 34RS26C, 35526, 37R$26 only).
Coaxialcable
I
Cable_ VCR
Cable
1
Note onDVD Connection:
• For thdbest picture quality., connect the DVD player directly to the TV.
Refer to your DVD manu_ for detailed connection information.
4
(Rear of TV)
c_,_ _ '_,,_
L
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
I
2
VMC-810S/820S(not supplied)
Coaxial cable
(Rear of TV)
,,i T Iv_ L
S VIDEO
AUDIO-R (red)
YC-15V/30V AUDIO-L (whi)
(not supplied)
Ii
RK-74A (not supplied)