Advertisement
Tools Needed
Power drill
•
•
Screwdriver
Installation
•
Do not connect the fireplace to the power supply until properly fixed to the wall and the
instructions are carefully read.
•
Make sure the area to be drilled does not have any hidden electrical wires or water and
gas pipes.
•
The minimum distances must be observed as shown in the diagrams below.
During installation of the fireplace, avoid any possible damage to concealed cables.
•
•
Please be careful when drilling holes.
•
This fireplace is designed to be permanently fixed to a wall. Choose a wall that is sturdy
enough to hold the weight of the fireplace such as a brick or cinder block wall. If
positioning on drywall, it must be fixed to studs. If you are not sure if the wall is stable
enough, then consult a hardware expert. The wall bracket must be fixed horizontally
with the cable routed to the bottom right of the fireplace.
•
For optimum viewing of the fuel bed, it is recommended that there be a distance of 2 feet
from the bottom of the fireplace relative to the floor (see figure for recommended fixed
dimensions).
19"
Floor
5
Advertisement
