Table of Contents
Advertisement
Multi-function box
Temperature selector
To
select
the
unit
temperature,either ºC or ºF,
press button 1. Confirm the
selection by pressing button 2.
Danger temperature selector
Note:
This stage should only be im-
plemented for those vehicles
that have an optional tempera-
ture sensor. When the motor-
cycle temperature exceeds the
set value, right-hand warning
light comes on. Default value:
110ºC (230ºF).
Enter the value by pressing
button 1 repeatedly. To move
on to the next digit, press
button 3. Confirm the selection
by pressing button 2.
20 User manual
of
1
2
1
2
Warning temperature selector
Note:
This stage should only be imple-
mented for those vehicles that
have an optional temperature
sensor. When the motorcycle
temperature exceeds the set va-
lue, the left-hand warning light
comes on.
Default value: 90ºC (190ºF). En-
3
ter the value by pressing button
1 repeatedly. To move on to the
next digit, press button 3. Con-
firm the selection by pressing
button 2.
Gear change turn rate selector
When the set rate is near to be-
ing reached, the left-hand war-
ning light will flash, indicating
the need to change gear.
Default value: 6000 rpm
Enter the value by pressing
button 1 repeatedly. To move on
3
to the next digit, press button 3.
Confirm the selection by pres-
sing button 2.
1
2
3
1
3
2
Advertisement
Table of Contents
