Table of Contents
Advertisement
DISASSEMBLY-3/5
(3) Eliminate twisting, etc. of the high-voltage cable and
arrange it so that no twisting occurs. (See Figure 3-3)
Caution : If the cable is not arranged correctly, the anode
cap could turn and cause an installation defect.
d
p
(4) Turn over the rubber cap symmetrically on the left and
right. (See Figure 3-4)
Caution : Take great care not to damage the anode cap.
t
(5) Fit your forefinger over the projection at the center of the
cap and hold the cap between your thumb and middle
finger. (See Figure 3-5)
r
- 8 -
High-voltage cable
Anode cap
u
a
o
Figure 3-3
Figure 3-4
Figure 3-5
Advertisement
Table of Contents
