Setting Up The Monitor; Installation - Philips 247E6 User Manual

2. Setting up the monitor

2. Setting up the monitor

2.1 Installation

Package contents
247E
AC/DC Adapter
Audio cable (optional)
Cable management
Note
Use only the AC/DC adapter model: Philips
ADPC1936
247E6
277E6
使用 前请阅读使用说明
User's Manual
保留备用 Monitor drivers
SmartControl software
Philips and the Philips' Shield Emblem are registered trademarks of
Koninklijke Philips N.V. and are used under license from Koninklijke
Philips N.V.
VGA (optional)
HDMI (optional)
DVI (optional)
4
Install base stand
1. Place the monitor face down on soft
and smooth surface taking care to avoid
scratching or damaging the screen.
2. Hold the base stand with both hands and
firmly insert the base stand into the base
column.
(1) Gently attach the base to the base
column until the latch locks the base.
(2) Use your fingers to tighten the screw
located at the bottom of the base, and
secure the base to the column tightly.
2
1