Replacing The Fuses - Yamaha 2012 WR250R Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT

Replacing the fuses

The main fuse is located behind panel
D. (See page 7-8.)
1
1
2
2
3
4
5
1. Main fuse
2. Spare main fuse
6
The fuse box, which contains the fuses
7
for the individual circuits, is located be-
hind panel C. (See page 7-8.)
8
9
EAU23542
7
1 2 3 4 5 6
1. Fuel injection system fuse
2. Radiator fan fuse
3. Backup fuse
4. Ignition fuse
5. Signaling system fuse
6. Headlight fuse
7. Spare fuse
If a fuse is blown, replace it as follows.
1. Turn the key to "OFF" and turn off
the electrical circuit in question.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
7-34
Specified fuses:
3. Turn the key to "ON" and turn on
the electrical circuit in question to
check if the device operates.
4. If a fuse immediately blows again,
have a Yamaha dealer check the
electrical system.
[EWA15131]
Main fuse:
30.0 A
Ignition fuse:
7.5 A
Signaling system fuse:
10.0 A
Headlight fuse:
15.0 A
Radiator fan fuse:
7.5 A
Backup fuse:
7.5 A
Fuel injection system fuse:
7.5 A