Table of Contents
Advertisement
Error Message
The calculation result cannot be displayed.
The result can be assigned to a variable using
Calculation S Variable. For example Seq (
999)Slist1
This function is disabled in Exam Mode.
Though you can continue this operation, you will not
be able to save data because of insufficient memory.
Delete unnecessary data from memory.
Too Long String
Transmission Failure
Undefined Result in Condition Judgment
Undefined Variable
Variable in Use
View Window settings for log contain a 0 or negative
value.
View Window value is out of range
Wrong Argument Type
Description
The number of horizontal dots for the result of a
calculation that uses the Main or eActivity application
x
,
x
, 1,
exceeds 32,787 (approximately 2,500 single-byte
characters).
Example: Executing the calculation seq(
1000), whose calculation result produces a list of
1,000 elements {1, 2, 3 ... 1000}.
Though the calculation result cannot be displayed
when this error occurs, you may be able to use the
S command to assign the result to a variable and
use that variable in a calculation.
Example:
1 Assigns the calculation result of seq(
to variable
displayed).
2 sum(
a
generated by seq(
There is not enough memory available to edit a file
you are attempting to open from with the calculator
application you are currently using, or you cannot
save the file after editing it.
Use Variable Manager to delete unneeded data
before editing a file.
A condition judgment program control command has
performed comparison with an undefined variable,
which returns a condition judgment of "Undefined".
1
2
a
(even though the result cannot be
) can be used to obtain the total of the list
x
x
,
, 1, 1000).
–
–
–
–
–
–
–
–
x
x
,
, 1,
x
x
,
, 1, 1000)
Appendix 306
Advertisement
Table of Contents
