Table of Contents
Advertisement
u To exit Dynamic Modify
Tap the close button (C) in the upper right corner of the slider display box.
Note
• While Dynamic Modify is running, up to three sliders can be displayed for the parameters included in the
graph formulas whose check boxes are selected. If there are more than three parameters in the selected
graph formulas, the three parameters are automatically assigned to sliders in accordance with the rules
below.
In the case of one graph formula, parameters are assigned to sliders from left to right until three are
assigned.
In the case of multiple graph formulas, parameters are assigned to sliders in the chronological order that the
graph formulas were registered (from left to right in each formula) until three are assigned.
• To change slider allocations from those applied automatically, perform the steps below.
1. Tap the upper left corner of the slider display box.
2. On the menu that appears, tap [Settings].
3. On the Slider Settings dialog box that appears, tap the "Parameter" line button.
4. On the parameter list that appears, tap the parameter you want to assign to the slider.
• If you use the above procedure to assign a different parameter to a slider, the parameter that was previously
assigned to the slider will retain the value it was set at when you changed the slider assignment. Also, the
minimum value, maximum value and step value will automatically change in accordance with the parameter
value. The automatically generated values will be applied if you later assign the parameter to a slider.
0313
To graph the functions
1 to 4 and a change in parameter
y
ax
2
bx
y
ax
=
–
and
=
b
from –2 to 2 affect the shape and position of each graph
b
+
, and then find out how a change in parameter
Chapter 3: Graph & Table Application 117
a
from
Advertisement
Table of Contents
