Brother HL-2130 User Manual page 23

Printing Methods
Note
• Remove each sheet of labels or envelope as soon as it has been printed. Stacking them may cause the
paper to jam or curl.
• If an envelope is creased after they are printed, see Improving the print quality on page 112.
• If envelopes get smudged during printing set the Media Type to Env. Thick.
®
• (For Windows users) If the DL size double flap envelopes are creased after printing, choose DL Long
Edge in Paper Size, from the Basic tab. Put a new DL size double-flap envelope in the manual feed slot
with the longest edge of the envelope in first, then print again.
• Envelope joints that are sealed by the manufacturer should be secure.
• All sides of the envelope should be properly folded without wrinkles or creases.
1
19