Manual Duplex Printing - Brother HL-2130 User Manual

Printing Methods

Manual duplex printing

If you are using the Macintosh Printer Driver, see Manual Duplex Printing on page 47.
a
Choose the following settings from each drop-down list of the printer driver.
 Paper Size
You can use all the paper sizes specified for the tray you are using.
 Media Type
You can use all the media types specified for the tray you are using except media that has a specified
print side, such as envelopes and labels.
 Paper Source
Tray 1
 Duplex / Booklet
Duplex (Manual)
 Duplex Type in Duplex Settings
There are four options for each orientation. (See Duplex / Booklet on page 28.)
 Binding Offset in Duplex Settings
You can specify the offset for binding. (See Duplex / Booklet on page 28.)
For any other settings, see Driver and Software in Chapter 2.
b
Send the print data to the machine. The machine will print all the even-numbered pages on one side of
the paper first. Then, the Windows
to print the odd-numbered pages.
Note
Before reinserting the paper, straighten it well, or you may get a paper jam. Very thin or thick paper is not
recommended.
Manual
®
driver instructs you (with a pop-up message) to reinsert the paper
1
1
22