Adjusting The Ranges Of A Graph (Sqr) - Casio fx9750G User Manual

2. Press 5 (AUTO).
5(AUTO)
• You can use auto View Window with any type of graph.
• You cannot use auto View Window inside a program.
• You can use auto View Window with a graph produced by a multi-statement
connected by ":", even if the multi-statement includes non-graph operations.
• When auto View Window is used in a statement that uses a display result com-
mand (^) to draw a graph, auto View Window parameters are applied up to
the display result command, but any graphs drawn after the display result com-
mand are drawn according to normal graph overdraw rules.
k k k k k Adjusting the Ranges of a Graph (SQR)
This function makes the View Window
It is helpful when drawing circular graphs.
Example To graph
Use the following View Window parameters.
Xmin
Xmax = 8
Xscale = 1
1. After drawing the graph, press 2 (Zoom) 6 (g).
2(Zoom)6(g)
2. Press 2 (SQR) to make the graph a circle.
2(SQR)
Other Graphing Functions
x -range value the same as the
= 5sin θ and then adjust the graph.
r
= –8 Ymin
Ymax = 5
Yscale = 1
= –1
1 2 3 4 5 6
8 - 6
y -range value.
155