LevelOne FCS-5051 User Manual page 63

NOTE: Make sure SMTP configuration has been completed. Refer to Mail
for further details.
 Send HTTP notification
Check this item, select the destination HTTP address, and specify the parameters for
HTTP notifications. When the Tampering Alarm is triggered, the HTTP notifications can
be sent to the specified HTTP server.
For instance, if the custom parameter is set as" action=1&group=2", and the HTTP
server name is" http://192.168.0.1/admin.php", the notification will be sent to HTTP
server as" http://192.168.0.1/admin.php?action=1&group=2" when alarm is triggered.
File Name
Enter a file name in the blank, ex. image.jpg. The uploaded image's file name format can be
set in this section. Please select the one that meets your requirements.
 Add date/time suffix
File name: imageYYMMDD_HHNNSS_XX.jpg
Y: Year, M: Month, D: Day
H: Hour, N: Minute, S: Second
X: Sequence Number
 Add sequence number suffix (no maximum value)
File name: imageXXXXXXX.jpg
X: Sequence Number
 Add sequence number suffix up to # and then start over
File Name: imageXX.jpg
X: Sequence Number
The file name suffix will end at the number being set. For example, if the setting is up to
"10," the file name will start from 00, end at 10, and then start all over again.
 Overwrite
The original image in the FTP site will be overwritten by the new uploaded file with a
static filename.
Save
Click on the <Save> button to save all the Tampering Alarm settings mentioned above.
62