LevelOne FCS-5051 User Manual page 39

SNMP v1/ v2
 Enable SNMP v1/ v2
Select the version of SNMP to use by checking the box.
 Read Community
Specify the community name that has read-only access to all supported SNMP objects.
The default value is "public".
 Write Community
Specify the community name that has read/write access to all supported SNMP objects
(except read-only objects). The default value is "write".
Traps for SNMP v1/ v2
Traps are used by the IP Camera to send massages to a management system for important
events or status changes.
 Enable Traps
Check the box to activate trap reporting.
 Trap address
Enter the IP address of the management server.
 Trap community
Enter the community to use when sending a trap message to the management system.
Trap Option
 Warm Start
A Warm Start SNMP trap signifies that the SNMP device, i.e. IP Camera, performs
software reload.
Click on <Save> button when complete.
38