Table of Contents
Advertisement
Preamble Type
802.11g Protection
Tx Power
Distance
5.7 Wireless Access Control List
Use the Wireless Access Control List provide or deny network access to wireless clients according to
their MAC addresses.
Enable Wireless Access
Control
Description
MAC Address
Add
Reset
MAC Address Filtering
Table
Delete Selected
causes the sending device to discard the current packet and move on to the next.
Tells the receiver that data is on the way. The preamble allows the receiver to
acquire the wireless signal and synchronize itself with the transmitter. Select Long
Preamble or Short Preamble. Long Preamble can provide better wireless LAN
compatibility with legacy devices, while Short Preamble can provide better WLAN
performance.
If you enable protection mode, every transmitted packet must wait until CTS is
received before it can be sent. Protection mode can prevent collision, but slows
wireless transmission speeds.
Auto Transmitted Power
Specify the distance between Access Points and clients. Longer distances may drop
high-speed connections.
Place a Check to enable Wireless Access Control.
Enter a description for the MAC address you want to add.
Specify the MAC address.
Click Add to add the MAC address.
Click Reset to discard your entries.
Check all the conditions you added.
Check an option below the Select column and click Delete Selected to delete the
Advertisement
Table of Contents
