Table of Contents
Advertisement
Radio
Enable SSID#
ESSID
5G Wireless Settings
Band
Channel
Data Rate
Auto Channel
2.4G Wireless Settings
Band
Channel
Click the radio button to enable or disable wireless functions.
The ENH700EXT supports four SSIDs. Each SSID can be configured to use a different
VLAN tag.
ESSID is the name of your wireless network (WLAN). In an area where more than one
WLAN is present, using a different ESSID allows you to separate the traffic. Any
device you want to participate in a particular WLAN must use the same ESSID. The
default ESSID is EnGenius. After specifying each ESSID, specify the VLAN ID for each
ESSID.
Select the IEEE 802.11 standard operating in your network environment.
You could select a channel you want.
Shows the available transmit data rate of the WLAN. The data rate affects
throughput. If you select a low data rate value, for example, the throughput is
reduced but the transmission distance increases.
By default, this option is disabled. If you click Enable, the ENH700EXT searches all
valid channels, then decides which channel is "cleanest" for transmissions and
change to that channel automatically.
Select the IEEE 802.11 standard operating in your network environment.
You could select a channel you want.
Advertisement
Table of Contents
