Table of Contents
Advertisement
Sound Adjustment
1
Press <SOUND> to display the
[Sound] menu.
Sound
Default
Default
Output select
Sound mode
Bass
Mid
Treble
Balance
Surround
4 Input multi display audio select
2
Select the item to adjust with
●
Menu that cannot be adjusted is greyed out.
Adjustable menu changes depending on signal,
input and menu setting.
3
Select the desired level with
listening to the sound.
4
Press <SOUND> to exit from adjust
mode.
■
To return to the previous screen
Press <RETURN>.
■
To reset to defaults
Press <DEFAULT> while the menu is displayed, or
press <ENTER> when [Default] is selected, then the
settings will be set to factory settings.
[Output select]
[Sound mode]
[Bass]
[Mid]
[Treble]
36
English
SPEAKERS
Normal
0
0
0
0
Off
Off
Select the audio output.
[SPEAKERS]: Internal speakers
[AUDIO OUT]: AUDIO OUT
terminal output
●
When [AUDIO OUT] is
selected, only [Balance] can
be selected. The other menus
are greyed out and cannot be
selected.
●
Audio volume and [Balance]
settings are memorized
separately for each output.
[Normal]:
Emits the original
sound.
[Dynamic]:
Accentuates sharp
sound.
[Clear]:
Attenuates human
voice.
Adjusts low pitch sounds.
Adjusts normal sounds.
Adjusts high pitch sounds.
[Balance]
[Surround]
[4 Input multi
display audio
select]
Note
●
[Bass], [Mid], [Treble] and [Surround] settings are
.
memorised separately for [Normal], [Dynamic] and
[Clear] in [Sound mode].
by
Adjusts left and right volumes.
[Off]:
Normal sound
[On]:
Surround sound
Sets the sound for 4 Input multi
display.
[Upper right]
The input sound
- [Lower left]:
of the selected
screen will be
output.
[Off]:
The sound will
not be output
during 4 Input
multi display.
Advertisement
Table of Contents
