Oki MB780 User Manual page 198

Menu item
Sides (Duplex)
Off
Long edge
Short edge
Content
Text
Text/Photo
Photograph
Darkness
1–9
Dial Prefix
Dialing Prefix Rules
Prefix Rule <x>
Automatic Redial
0–9
Redial Frequency
1–200
Behind a PABX
Off
On
Enable ECM
On
Off
Enable Fax Scans
On
Off
Driver to fax
On
Off
Allow Save as Shortcut
On
Off
Description
Specifies how the text and graphics are oriented on the page
Notes:
•
Off is the factory default setting.
•
Long edge assumes binding along the long edge of the page (left edge for
portrait orientation and top edge for landscape orientation).
•
Short edge assumes binding along the short edge of the page (top edge for
portrait orientation and left edge for landscape orientation).
Specifies the type of content that will be scanned to fax
Notes:
•
Text is used when the document is mostly text.
•
Text/Photo is the factory default setting. Text/Photo is used when the
documents are mostly text or line art.
•
Photograph is used when the document is a high-quality photograph or inkjet
print.
Lightens or darkens the output
Note: 5 is the factory default setting.
A numeric entry field is provided to enter numbers
Establishes a dialing prefix rule
Specifies the number of times the printer tries to send the fax to a specified number
Note: 5 is the factory default setting.
Specifies the number of minutes between redials
Enables switchboard blind dialing without a dial tone
Enables Error Correction Mode for fax jobs
Lets you send faxes by scanning at the printer
Allows driver to fax jobs to be sent by the printer
Lets you save fax numbers as shortcuts in the printer
Understanding printer menus
198