Learning about the printer
Printer configurations
CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You
must use either a printer stand or printer base if you are using a high-capacity input tray, a duplex unit and an
input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies,
and faxes, you may need additional furniture. For more information, see the safety sheet that came with your
printer.
Note: Printer configuration may vary depending on your printer model.
Basic models
Automatic Document Feeder (ADF)
1
Printer control panel
2
Standard exit bin
3
4
Multipurpose feeder
550-sheet tray (Tray 1)
5
6
550-sheet tray (Tray 2)
7
Optional exit bin
Selecting a location for the printer
When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install
any options, leave enough room for them also. It is important to:
•
Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard.
•
Provide a flat, sturdy, and stable surface.
Learning about the printer
14