Table of Contents
Advertisement
Turning On/Off the Power
Initial Setup
When you turn on the LCD Monitor for the fi rst time,
initial setup menu screen will appear. Set desired
"Language" and "Monitor Location". Perform the
following steps before you press MONITOR POWER
on the remote control unit.
1. Insert the batteries into the remote control unit.
(See page 9.)
2. Plug in the AC cord to the AC outlet. (See page 8.)
Language (Language setting)
Select from among 3 languages: English, French and
Spanish.
1
Press a b to select the desired language listed
on the screen, and then press ENTER.
Language
Monitor Location
16
Press POWER on the LCD Monitor, or MONITOR POWER on the
remote control unit to turn the power on.
•
POWER indicator (Blue): The LCD Monitor is on. (After a few seconds, a
window appears with sound.)
POWER
POWER
•
The initial setup starts when the LCD Monitor powers on for the fi rst time.
If the LCD Monitor has been turned on before, the initial setup will not be
invoked. For changing the settings of the initial setup, perform EZ setup
on the Setup menu on page 25.
Press POWER on the LCD Monitor, or MONITOR POWER on the
remote control unit again to turn the power off.
MONITOR
MONITOR
POWER
POWER
•
The LCD Monitor enters standby and the image on the screen disappears.
(On/Standby)
(On/Standby)
•
The POWER indicator on the LCD Monitor turns off.
•
If you ar
sure to remove the AC cord from the AC outlet.
•
Weak electric power is still consumed even when the LCD Monitor is
turned off.
English
Français
Español
e not going to use this LCD Monitor for a long period of time, be
Monitor Location
Select "Home" or "Store" for the location where you
plan to install the LCD Monitor.
2
Press c/d to select "Home" or "Store".
Press ENTER to enter the setting.
Language
Monitor Location
•
If you select "Home", AV MODE is set to "STANDARD".
•
If you select "Store", AV MODE is set to "DYNAMIC
(Fixed)".
In case no remote control signal is received within 30
minutes, AV MODE will change to "DYNAMIC (Fixed)"
automatically.
•
For changing the Monitor Location after the setting, see
"EZ Setup" on page 25.
Example
Home
Store
Advertisement
Table of Contents
