VTech CS6114 Complete User's Manual page 34

Appendix
Troubleshooting
I hear other calls when using the telephone.
• Disconnect the telephone base from the telephone wall jack. Plug in a different
telephone. If you still hear other calls, the problem is probably in the wiring or local
telephone service. Contact your telephone service provider.
I hear noise on the cordless handset and the keys do not work.
• Make sure the telephone line cord is plugged in securely.
My caller ID features are not working properly.
• Caller ID is a subscription service. You must subscribe to this service from your
telephone service provider for this feature to work on your telephone.
• The caller may not be calling from an area which supports caller ID.
• Both your and the caller's telephone service providers must use equipment
compatible with the caller ID service.
The caller ID information displays after the first or second ring.
•
• If you subscribe to high-speed Internet service (DSL - digital subscriber line)
through your telephone line, you must install a DSL filter between the telephone
line cord and the telephone wall jack. The filter prevents noise and caller ID
problems caused by DSL interference. Contact your DSL service provider for more
information about DSL filters.
The telephone does not receive caller ID or the telephone does not
show caller ID during call waiting.
• Make sure you subscribe to caller ID with call waiting features provided by your
telephone service provider.
• The caller may not be calling from an area which supports caller ID.
• Both your and the caller's telephone service providers must use equipment
compatible with caller ID service.
• If you subscribe to high-speed Internet service (DSL - digital subscriber line)
through your telephone line, you must install a DSL filter between the telephone
line cord and the telephone wall jack. The filter prevents noise and caller ID
problems caused by DSL interference. Contact your DSL service provider for more
information about DSL filters.
Out of range or no pwr at base shows on the handset screen.
• The handset may be out of range. Move it closer to the telephone base.
• Make sure the power cord is securely plugged into the telephone base. Use a
working electrical outlet not controlled by a wall switch.
• Reset your telephone by unplugging the power adapter from the telephone base.
Disconnect the battery from the cordless handset. Wait for 15 seconds, then
plug in the power adapter and install the battery again. Place the handset in the
telephone base and allow up to one minute for the handset and telephone base to
synchronize.
• Other electronic products such as HAM radios and other DECT phones can cause
interference with your cordless phone. Try installing your phone as far away as
possible from these types of electronic devices.
31