Toshiba GA-1191 Setup Manual page 47

8
Key in the port number (nor-
mally "80") to access HTTP,
and then press the [ENTER]
button.
The screen returns to the one shown in
step 7.
Port number "80" is set by default. If you want to change it, press the [Clear/Stop] button
and key in the desired port number.
9
Press or
ONDARY PORT NUMBER, and
then press the [ENTER] but-
ton.
10
Key in the port number (nor-
mally "8080") to access
TopAccess, and then press the
[ENTER] button.
The screen returns to the one shown in
step 9.
Port number "8080" is set by default. If you want to change it, press the [Clear/Stop] but-
ton and key in the desired port number.
11
Press the [CANCEL] button
once to return the screen to
the NETWORK menu screen.
If you press the [CANCEL] button more than twice and exit the NETWORK menu, the
NIC initialization operation in the next step becomes ineffective. In this case, repeat the
procedure from step 1.
12
Press or
PLETE, and then press the
[ENTER] button.
The initialization starts and "Initializing"
appears. When it is completed,
"Operation Completed" appears and the
screen returns to the one shown in step
3.
13
Press the [CANCEL] button once or press the [FUNCTION CLEAR]
button to return the screen to the "user function mode" main
screen.
PRIMARY PORT NUMBER
ENTER THE PORT NUMBER:
to select SEC-
HTTP
01.HTTP SERVER
02.PRIMARY PORT NUMBER
03.SECONDARY PORT NUMBER
SECONDARY PORT NUMBER
ENTER THE PORT NUMBER:
NETWORK
04.IPX/SPX
05.APPLE TALK
06.HTTP
to select COM-
NETWORK
01.COMPLETE
02.ETHERNET
03.TCP/IP
HTTP Configuration 45