Sanyo PLC-XU300A Owner's Manual page 26

Basic Operation
NO SHOw button
Press the NO SHOW button on the remote control to black out
the image. To restore to normal, press the NO SHOW button
again or press any other button. The screen changes each time
you press the NO SHOW button as follows.
black out ➜ normal ➜ black out ➜ normal ➜
P-TIMER button
Press the P-TIMER button on the remote control. The P-Timer
display 00:00 appears on the screen and the countdown starts
(00:00–59:59).
To stop the countdown, press the P-TIMER button. To cancel
the P-Timer function, press the P-TIMER button again.
IMAGE button
Press the IMAGE button on the remote control to select a
desired image mode of the screen. See pages 33, 40 for
details.
SCREEN button
Select the screen size (See pages 35-36, 43 for details).
6
• • • • •
No show disappears after 4 seconds.
P-Timer display
✔
02:02
SCREEN button
P-TIMER button
NO SHOw button
IMAGE button
Note:
See the previous page for the description of
other buttons.