Sanyo PLC-XU300A Owner's Manual page 19

Enter a PIN code
ed
Use the Point buttons to enter a number. Press the
8
Point button to fix the number and move the red frame
pointer to the next box. The number changes to "✳". If you
fixed an incorrect number, use the Point
the pointer to the number you want to correct, and then
enter the correct number.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to Set.
Press the SELECT button so that you can start to operate
the projector.
If you entered an incorrect PIN code, PIN code and the
number (✳✳✳✳) will turn red for a moment. Enter the
correct PIN code all over again.
what is PIN code?
PIN (Personal Identification Number) code is a security
code that allows the person who knows it to operate the
projector. Setting a PIN code prevents unauthorized use of
the projector.
A PIN code consists of a four-digit number. Refer to the PIN
code lock function in the Setting Menu on pages 54-55 for
locking operation of the projector with your PIN code.
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector can no
longer be started. Take a special care in setting
a new PIN code; write down the number in a
column on page 76 of this manual and keep it
on hand. Should the PIN code be missing or
forgotten, consult your dealer or service center.
✔Note:
• If the PIN code number is not entered within three
minutes after the PIN code dialog box appeared, the
projector will be turned off automatically.
• The "1234" is set as the initial PIN code at the factory.
PIN Code Input Dialog Box
7
button to move
Basic Operation
After the OK icon disappears,
you can operate the projector.
19