Computer Input; Input Source Selection (Computer 1: Rgb / Component / Rgb(Scart)) - Sanyo PLC-XU300A Owner's Manual

Computer Input

Input Source Selection (Computer 1: RGB / Component / RGB(Scart) )
Direct Operation
Choose Computer 1(RGB) or Computer 1(Scart) by pressing the INPUT button on the top control or press the
COMPUTER 1 button on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation as described
below.
Remote Control
Menu Operation
1 Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
ed
Use the Point

When Computer 1 is selected, press the Point
3
button to access the submenu items. Use the Point
ed
buttons to select the RGB input source and then
press the SELECT button.
Note:
✔
When the Input Search function is set to On1 or On in
the Auto setup function, the input signal will be searched
automatically (p.45).
COMPUTER 1 button
Computer 1(RGB)
Computer 1(Scart)
ed
buttons to select Input and
8
or the SELECT button.
buttons to select Computer 1.
Top Control
INPUT button
Input Menu
8
Computer
1
Computer 1(RGB) /
(Component) / (Scart)
Computer (RGB)
Video
S-video
7