Front Panel Controls; Front Panel Display - Cambridge Audio azur 540D V2 User Manual

Front panel controls

1
Standby / On
Standby/On
1
Switches the unit between Standby mode (indicated by a dim power
LED) and On (indicated by a bright power LED). Standby is a low power
mode where the power consumption is less than 10 Watts. The unit
should be left in Standby mode when not in use.
2 IR sensor
Receives IR commands from the supplied Azur remote control. A clear
unobstructed line of sight between the remote control and the sensor is
required.
Display
3
Used to display the 540D V2's functions and playback state etc. Please
refer to the following 'Front Panel Display' section for more information.
Disc tray
4
DVD/Compact Disc tray. Use the Open/Close button to activate.
Open/Close
5
Allows you to open and close the disc tray for loading of discs. Pressing
Play will also close the tray and start playing a disc if one is loaded.
Play/Pause
6
Plays the disc and pauses (freezes) play when playing.
Stop
7
Press once to stop playback. Pressing Play will cause the playback be re-
started from the same position. Press again to fully stop playback.
Skip
8
Press once to skip between tracks/chapters.
6
2

Front panel display

1
Indicates the chapter title and chapter number fields.
2
Displays the video output format: NTSC or PAL.
3
Shows the hour, minutes and seconds elapsed on the disc.
4
Indicates a DivX/MP4 encoded disc is playing.
5
Indicate when a Dolby Digital soundtrack is being played back (either
decoded internally or output digitally for external decoding) or DTS
soundtrack (for external decoding only).
6
Shows when Repeat (
functions are in use.
7
Shows when the disc is being played or paused.
8
Used to display the various functions of the unit.
4
Open
Close
3
5
1 2
Title/Chapter
Video format
Time
MP4
Decoding mode indicators
Repeat
), Repeat All (
Playback
Main information display
azur
540D
DVD Player
Play
Pause Stop Skip
6 7 8
3 4 5
8 7
) and A-B Repeat (
6
)