Operations On Dvd Deck; Basic Playback - JVC hr-xvs30ek Instructions Manual

30

Basic Playback

● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
ATTENTION
● You can not use the DVD deck when the S-VHS deck is in
the Automatic Satellite Programme standby and recording
mode.
● You can use the DVD deck when the S-VHS deck is in the
timer standby mode.
To play back an MP3/WMA/JPEG disc, see pages 48 – 53.
A
Load the disc.
A Press x on the DVD deck to open
the disc tray.
● The unit's power comes on
automatically.
B Place the disc in the disc tray.
● For details, refer to "Placing a Disc"
( pg. 6).
C Press x on the DVD deck to
close the disc tray.
● Pressing 4 also closes the disc tray.
● Playback begins automatically if an auto-playback DVD disc is
loaded. Although the S-VHS deck is selected, the DVD deck is
selected automatically if the S-VHS deck is in stop mode.

OPERATIONS ON DVD DECK

B
Select the DVD deck.
On the unit
Press VCR/DVD repeatedly so that the DVD indicator
lights up.
On the remote control
Press DVD so that the DVD indicator lights up.
C
Start playback.
Press 4.
Example: DVD VIDEO
Title number Chapter number
● It may take a few seconds to start playback.
● If you load a DVD disc whose region code does not match the
DVD deck, "REGION CODE ERROR!" appears on the TV
screen. For details, refer to "Region Number" (
● With Video CD discs with PBC control or some DVD discs,
the menu display may appear on the TV screen after starting
playback. In this case, select an item which you want to play
back from the menu. Otherwise, the playback cannot go
forward. Refer to "Locating a desired scene using the menu of
a Video CD with PBC" (
scene using the DVD menu" (
D
Pause playback.
Press 9.
● To resume normal playback, press 4.
E
Stop playback.
Press 8. Press x on the DVD deck to open the disc tray,
then remove the disc.
● Pressing 4 resumes playback from the position where you
stopped playback. For details, see "Resume Function" on
page 32.
NOTE:
When you press x while the unit is turned off, the unit's power
comes on and the disc tray opens automatically.
When the playback picture is distorted or not displayed on the
TV which is connected to the COMPONENT VIDEO OUT
connectors
A Confirm the DVD indicator is lit.
B Press and hold DVD for more than 3 seconds to change the
scan mode to "Progressive".
Elapsed time
pg. 5).
pg. 31) or "Locating a desired
pg. 31).