Table of Contents
Advertisement
L-2 Select and L-2 Input Setting
(L-2 SELECT and L-2 INPUT)
Set "L-2 SELECT" to the appropriate mode depending on the
type of appliance connected to the unit's L-2 IN/DECODER
connector. Set "L-2 INPUT" to the appropriate mode depending
on the output signals of the connected appliance.
Perform steps A – C of "L-1 Output Setting (L-1 OUTPUT)"
on page 56.
A
Select the input mode for the L-2 IN/
DECODER connector.
Press rt to move the
highlight bar (pointer) to "L-2
SELECT" or "L-2 INPUT".
Then, press OK or e to select
the appropriate setting.
* The default setting is bold in
the table below.
8 L-2 SELECT
To use this unit as the recording deck
A/V:
with the player connected to the L-2
IN/DECODER connector, or to use
the satellite receiver connected to the
L-2 IN/DECODER connector.
To use a decoder connected to the
DECODER:
L-2 IN/DECODER connector.
SAT:
To view a satellite programme with
the TV set while the unit is turned off.
(
pg. 62)
8 L-2 INPUT
VIDEO:
If a connected appliance's output is
compatible only with regular video
signals, set to "VIDEO".
S-VIDEO:
If a connected appliance's output is
compatible with Y/C signals, set to
"S-VIDEO". You can obtain a high-
quality S-VHS picture. (For
connection, be sure to use a 21-pin
SCART cable that is compatible with
the Y/C signal.)
B
Return to the normal screen.
Press SET UP MENU.
NOTES:
● Decoder function is not available in the U.K.
● If you have a satellite receiver or a decoder connected to the
L-2 IN/DECODER connector, be sure to set "L-2 SELECT" back
to the appropriate mode after editing.
● If you are not connecting a satellite receiver or a decoder to the
L-2 IN/DECODER connector, leave "L-2 SELECT" set to "A/V".
● When "L-2 SELECT" is set to "SAT", "SAT" appears on the TV
screen or front display panel instead of "L-2".
● If "L-2 SELECT" is set to "DECODER", it is impossible to set
"L-2 INPUT" to "S-VIDEO".
● If "L-1 OUTPUT" is set to "S-VIDEO", it is impossible to set
"L-2 SELECT" to "DECODER".
Advantages of S-VHS video recorders
You can edit from VHS to S-VHS, S-VHS to VHS, or, from
S-VHS to S-VHS.
● From VHS to S-VHS: Record VHS playback signals in the
S-VHS mode. Although the picture quality is inherently
limited by that of the original, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
● From S-VHS to VHS: Because the picture quality of the
source material is very high, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
● From S-VHS to S-VHS: All signals will be transferred with
minimum degradation.
57
Hide quick links:
Advertisement
Table of Contents
