Warning Messages - Janome memory craft 4900 Instruction Manual

Warning Messages

Janome Memory Craft 4900 Instruction Manual
If a buzzer sounds and the LCD screen shows one of these messages, follow the guidance below.
Message
www.toews.com
Problem/Cause
• The machine is started with the presser foot up.
• The machine will stop if the presser foot is raised
while sewing.
• The machine will stop after several stitches if the
buttonhole is sewn without lowering the
buttonhole lever.
• The twin needle key is pressed when a pattern
unsuitable for twin needle sewing has been
selected.
• An unsuitable pattern is selected when the twin
needle mode has been activated.
• The machine is stopped while sewing a locking
stitch.
• The elongation key is pressed when a pattern
that cannot be elongated has been selected.
• The turnover key or memory key is pressed
while in the direct pattern selection mode (mode 1).
8 4
Janome Sewing Machine 4900
Try this
Lower the presser
foot and restart
the machine.
Lower the buttonhole
lever and restart the
machine.
Cancel the twin needle
mode, and sew with a
single needle.
Sew until it automatically
stops.
Select satin stiches to
be elongated.
Select the equivalent
patterns from mode 2.
MC4900 Owners Manual/ User Guide