Problems And Warning Signs - Janome 5060DC Instruction Book

Problems and Warning Signs

Warning sign
Audible signal The buzzer sounds when:
Pip
Pip-pip-pip
Pip-pip-peep
Peep
The machine will not sew with the start/stop
button because the foot control is connected.
The bobbin winder spindle is moved to the right.
The machine is restarted too soon after it has
halted due to the overload.
Auto thread cutting error due to a problem in
the electronic components or tangled in hook
area.
Normal operation
Invalid operation
Buttonhole sewing completed
Malfunction
Cause
49
Try this
Disconnect the foot control
and start the machine.
Move the bobbin winder
spindle to the left.
Wait for at least 15 seconds
to restart. If threads are
jamming, remove the
jammed threads.
Remove the jammed
threads in the hook area.
If the error occurs again
after cleaning the hook area,
contact the service center
or the store from where the
machine was purchased.