D-Link DSL-G604T User Manual page 51

This window holds the following fields for the user to configure.
Connection Type
IP Address
Subnet Mask
Gateway Address
Primary DNS
Address
Secondary DNS
Address
MTU
DSL-G604T Wireless ADSL Router Manual
Figure 4- . WAN Settings window for Static IP Address
This field allows the user to choose the connection type used to connect your router
to your ISP. The user may choose between 1483 Bridged IP LLC, 1483 Bridged IP
VC-Mux, 1483 Routed IP LLC and 1483 Routed IP VC-Mux. The correct choice
should be told to you by your ISP.
Enter the IP address based on the information provided to you by your ISP.
Enter the Subnet Mask based on the information provided to you by your ISP.
Enter the Default Gateway based on the information provided to you by your ISP.
This entry is for the IP address of your primary domain name server, which should
also be provided to you by your ISP. The router will first try the Primary DNS
Address to resolve a website's URL IP address. If this IP address fails, the router
will then try the Secondary DNS Address.
The IP address of the secondary domain name server will be used to resolve a
website's URL IP address if the Primary DNS Address fails. The information in this
field should also be provided by your ISP.
The Maximum Transmission Unit (MTU) is a link layer restriction on the maximum
number of bytes of data in a single transmission. The default size is 1400 bytes per
packet.
51