Table of Contents
Advertisement
1. Select WWN From Detected Host.
2. Key in: first enter the WWPN (exact 16 hex digits) of the host in the "Host
WWN" text field. Optional host nick name (up to 23 ASCII characters) can be given
for descriptive purpose.
Choose "Add" operation, then Confirm/Submit to complete the add operation.
The added host will be shown in the upper half of the Config Frame. Up to 20
hosts can be added.
To delete a host from the list, select the radio button in front of the host list.
Choose "Delete" operation, then Confirm/Submit to complete the delete operation.
Once volumes are created and the host name list is established, Volume Set Host
Filters can be specified by clicking "View/Edit Volume Set Host Filters" link at
bottom of "Fibre Channel Config" page. Volume Set Host Filters can also be speci-
fied by clicking "Volume Set Functions"
"Volume Set Host Filters" from the
Menu Frame. Select the volume for LUN masking and then click the submit button.
3-49
Configuring
Advertisement
Table of Contents
