3.6.4 Activate Incomplete Raid Set
When one of the disk drive is removed in power off state, the raid set state will
change to Incomplete State. If user wants to continue to work, when the RAID
subsystem is power on. User can use the Activate Raid Set option to active
the raid set. After user complete the function, the Raid State will change to
Degraded Mode.
To activate the incomplete the raid set, click on the Activate Raid Set link. A
"Select The RAID SET To Activate" screen is displayed showing all raid set exist-
ing in the current controller. Click the raid set number you which to activate in the
select column.
3-25
Configuring