Table of Contents
Advertisement
64bit LBA: the max. size 512TB, for Unix or Linux.
4K Block: the max. size 16TB , just use with " basic disk manager " under OS
Window 2000, 2003 or XP. Noted that can't be used by with dynamic disk
manager.
Initialization Mode:
Set the Initialization Mode for the Volume Set. Foreground mode is faster
completion and background is instant available. No init mode is for rescuing
volume. If you try to Rescue Missing volume set, please contact our engineer
for assistance.
Strip Size:
This parameter sets the size of the stripe written to each disk in a RAID 0, 1,
0+1, or 5 logical drive. You can set the stripe size to 4 KB, 8 KB, 16 KB, 32
KB, 64 KB, or 128 KB.
A larger stripe size produces better-read performance, especially if your com-
puter does mostly sequential reads. However, if you are sure that your com-
puter does random reads more often, select a small stripe size
Note: RAID level 3 can't modify strip size.
Cache Mode:
The RAID subsystem supports Write-Through Cache and Write-Back Cache.
Tag Queuing:
The Enabled option is useful for enhancing overall system performance under
multi-tasking operating systems. The Command Tag (Drive Channel) function con-
trols the Fibre command tag queuing support for each drive channel. This function
should normally remain enabled. Disable this function only when using older Fibre
drives that do not support command tag queuing
Fibre Channel/LUN Base/LUN:
Fibre Channel: Two 4Gbps Fibre channel can be applied to the internal RAID
subsystem. Choose the Fibre Host# option 0, 1 and 0&1 cluster.
3-31
Configuring
Advertisement
Table of Contents
