Table of Contents
Advertisement
Physical Drives
Raid System Function
View Drive Information
Select The Drives
Create Pass Through Disk
Select The Drives
Modify Pass Through Disk
Select The Drives
Delete Pass Through Disk
Select The Drives
Delete Pass Through
Are you sure?
Identify Selected Drive
Select The Drives
Identify Enclosure
Select The Enclosure
Mute The Alert Beeper
Alert Beeper Setting
Change Password
Enter New Password
Re-Enter Password
Save The Password
JBOD / RAID Function
RAID, JBOD
Configured AS JBOD?
Are you sure?
Background Task Priority
Save The Settings
SATA NCQ Support
HDD Read Ahead Cache
Stagger Power on
HDD SMART Status Polling
Controller Fan Detection
Save The Settings
Disk Write Cache Mode
Capacity Truncation
Terminal Port Config
Baud Rate
1200,2400,4800,9600,
19200,38400,57600,115200
Stop Bits
1 bit, 2 bits
Update Firmware
Restart Controller
Yes, No
Are you sure?
Configuring
Fibre Host#, LUN Base,
Fibre LUN, Cache Mode,
Tag Queuing
Fibre Host#, LUN Base,
Fibre LUN, Cache Mode,
Tag Queuing
Yes, No
Yes, No
Yes, No
Disabled, Enabled
Yes, No
Yes, No
Yes, No
UltraLow(5%), Low(20%),
Medium(50%),High(80%)
Yes, No
Enable, Disable
Enable, Disable Maxtor,
Disable
0.4, 0.7, 1.0, 1.5, 2.0, 2.5,
3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0
Disabled, Enabled
Enabled, Disabled
Yes, No
Auto, Enabled, Disabled
To Multiples of 10G,
To Multiples of 1G,
Disabled
Yes, No
3-13
Advertisement
Table of Contents
