Answering system
Remote access
4. Hang up or press
Cut out the remote access wallet card at the back of this user's manual for
quick reference.
NOTES:
•
If the auto attendant is active, enter your extension number. Wait for the outgoing
announcement to begin, then enter the remote access code.
•
If you do not enter a valid remote access code, the answering system will answer the call as
usual, but the sound from pressing the dialing keys and the environment will be recorded as a
message and stored in the general mailbox.
•
If you do not enter any remote access code, the answering system announces,
"Thank you for calling," and the call ends.
•
When there is no new message or all the new messages are played during remote access, you
hear a help menu listing all features and commands. If there is no command after the help
menu is played three times, the call ends automatically.
•
If you press 4 within five seconds after each message playback starts, the previous message
plays instead of repeating the current message.
to end the call.
61