Add And Register A Deskset; Register The Deskset To Your Synj Sb67138/Sb67158 Telephone; Base - AT&T SynJ SB67138 User Manual

Getting started

Add and register a deskset

The handset provided with the SynJ SB67138/SB67158 is already registered
as Handset 1. Additional desksets are assigned numbers in the order they
are registered (Deskset 2 to Deskset 10). You can register a maximum of 10
desksets/handsets, or 9 desksets/handsets and one cordless headset.
You can add desksets (SynJ SB67148, purchased separately) to the SynJ
SB67138/SB67158 at any time, but each new deskset must be registered
with the main telephone base before use.
Start registration when the deskset shows
Press MENU on MAIN base, select Registration & then
Register HS. Then press Start.
Register the deskset to your SynJ SB67138/SB67158 telephone base
1. On the SynJ SB67138/SB67158 telephone base, press MENU/
Scroll down to Registration and press
2.
3. Press /ENTER again to select Register HS.
MENU
The main telephone base screen shows
Registering new device...
4. Press the Start softkey on the unregistered deskset. The
deskset shows Registering...Please wait. You hear a
beep sound when the registration process is successful.
The main telephone base shows Deskset registered.
The deskset shows Registered and then X:Deskset X
(X represents the extension number [1-0]; Deskset X
represents the default deskset name). It takes up to 60
seconds to complete the registration process.
NOTE: If the registration fails, the screen shows Press MENU on
MAIN base, select Registration & then Register HS. Then press
Start. Try the registration process again.
/ENTER.
MENU
8
Press MENU on
MAIN base, select
Registration &
then Register HS.
Then press Start
.
ENTER
SB67138/SB67158:
COVM
Speed dial setup
Customer support
Registration
>
Register HS
>
Deregistration
Registering
new device...
Deskset
registered
SB67148:
2:Deskset 2