Deskset Installation - AT&T SynJ SB67138 User Manual
Dect 6.0 4-line expansion deskset
Hide thumbs
Also See for SynJ SB67138:
- User manual (110 pages) ,
- Quick start manual (2 pages) ,
- User manual (99 pages)
Table of Contents
Advertisement
Getting started
Deskset installation
Install the deskset, as shown below.
Plug the large end of
the power adapter into
a power outlet not
controlled by a wall
switch.
Raise the antenna for
optimum wireless range
and performance.
IMPORTANT INFORMATION:
•
Use only the power adapter supplied with this product. To order a replacement power adapter,
visit our website at
1 (888) 915-2007
•
The power adapter is intended to be correctly oriented in a vertical or floor mount position.
The prongs are not designed to hold the plug in place if it is plugged into a ceiling,
under-the-table or cabinet outlet.
Plug the end of the coiled
handset cord into the jack at
the bottom of the deskset.
www.telephones.att.com
.
In Canada, dial
,
or call
1 (866) 288-4268
5
Route the power adapter
cord through the slot at the
bottom of the deskset.
Plug the small end of the
power adapter into the
power jack at the bottom of
the deskset.
.
Advertisement
Table of Contents
