Table of Contents
Advertisement
Assembling and Mounting the Fan Blades and Switch Hsg
10. Assemble the Housing Switch Cup onto the assembled
Adapter with three screws. (Figure 5)
11. Restore Power and your fan is now wired to be turned
on and off from the fan pull chain speed control.
1. Restore electrical power to the outlet box by turning the
electricity on at the main fuse box.
2. Check the operation of the fan by gently pulling on the
pull chain switch. (Figure 1)
3. If airflow is desired in the opposite direction, turn the
fan off and wait for the blades to stop turning. Then slide
the reverse switch to the opposite position and turn fan
on again. Your fan model is equipped with a 4-position,
3-speed, pull chain switch. The operating sequence is as
follows:
1st Pull = HIGH
2nd Pull = MEDIUM
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the fi nish.
Abrasive cleaning agents are not required and should be
avoided to prevent damage to fi nish.
Periodic light dusting of the blades is recommended.
A feather duster will work best.
Operating Instructions - Pull Chain
3rd Pull = LOW
4th Pull = OFF
Maintenance
Blade Cleaning
Reversing
Switch
Speed Control
Pull Chain
CAUTION
Do not use water when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of electrical shock.
Avoid using water, cleansers, or harsh rags, which can
warp and ruin the blades.
9
Figure 5
Figure 1
Hide quick links:
Advertisement
Table of Contents
