Advertisement
The Centaurus
6½˝dia
8˝
20° Blade Pitch
Blade Sweep = 60˝ dia
w/BB4220 blades (shown above)
54˝ dia w/SB4220 blades
Net Hanging Weight: 35 lbs
INSTALLATION REQUIREMENTS:
Ceiling fan attaches to electrical junction box securely anchored and capable of withstanding a load of at least 50 lbs.
ELECTRICAL REQUIREMENTS:
Ceiling fan requires a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit. 220 VAC, 50 Hz version is
available.
FAN SPEEDS:
3 fan speeds with reversing control. High – 85 rpm; Med – 45 rpm; Low – 40 rpm
CONTROL OPTIONS:
The reversing, hand-held remote control (C20) and canopy-style receiver unit (RECAN355) are included. Push button
remote control with frequency code settings located on both the transmitter and the receiver units. Each push button unit
will consist of 3 separate fan speeds, infi nite light levels, reverse and off button. Installation and operating instructions
provided with control. Optional wall control (C21) is available (to be used in conjunction with fan receiver).
LIGHTING OPTIONS:
The 3-bulb (40 watt max candelabra bulbs - not included) downlight fi xture is included with this fan assembly. Maximum
wattage of downlight not to exceed 120 watts.
DOWNROD OPTIONS:
The Centaurus
fan comes with a standard 6" downrod. Optional downrods are available in 12", 18", 24", 36", 48",
®
60", and 72". For installations requiring a longer downrod, a downrod coupler is available. The Centaurus
mounted on a sloped ceiling up to 30°. Most sloped ceiling installations require a downrod longer than the standard 6˝
downrod. Optional sloped ceiling ball kits (SCB52) are available for up to 52°. Call tech support for more information.
BLADE SETS:
A set of 3-blade set required - sold separately. Bent-Blade (BB) / Straight-Blade (SB) material is 5-layer wood. Available
fi nishes are BB4220CY / SB4220CY (Cherry); BB4220MH / SB4220MH (Mahogany) and BB4220MP / SB4220MP
(Maple). See Catalog or visit our website, www.fanimation.com for more information.
DAMP LOCATION:
Fan not rated for Damp Location usage.
Copyright 2008 Fanimation, Inc.
Fan Assembly – FP4220SN
®
Ceiling
A
7´ min
Floor
Dimensions shown in inches
10983 Bennett Parkway
Zionsville, IN 46077
Toll Free (888) 567-2055
FAX (866) 482-5215
Outside U.S. call (317) 733-4113
Visit Our Website www.fanimation.com
Available Finish
SN
Satin Nickel
Distance from Ceiling
to Edge of Blade
Fan w/6˝ downrod
15˝
Fan w/12˝ downrod
21˝
Fan w/18˝ downrod
27˝
Fan w/24˝ downrod
33˝
Fan w/36˝ downrod
45˝
Fan w/48˝ downrod
57˝
Fan w/60˝ downrod
69˝
Fan w/72˝ downrod
81˝
®
fan can be
2008/05
A
Advertisement
