Storage, Removal, And Disposal; Storing The Device - Honeywell HON 5020 User And Maintenance Manual

9

Storage, removal, and disposal

Contents
9.1

Storing the device

Storage of the
packing units
Storage of spare parts
HON 5020 gas pressure regulator with HON 640a / HON 642a pilot
Topic
Storing the device
Disassembling the device
Disposing of the device
Observe the following rules:
 Do not store the device outdoors.
 Store the device in a dry and dust-free environment on a flat surface.
 Do not expose the device to any aggressive media, ozone or ionizing radiation or to di-
rect heat sources.
 Storage conditions:
 Temperature: 32 °F to 77 °F (0 °C to 25 °C)
 Relative humidity: < 55 %.
 Avoid mechanical vibrations.
 Storage periods:
 When storing the device for up to one year:
Store the device in its original packaging and in the same condition it was de-
livered. All protective caps of the device must remain in place.
 When storing the device for more than one year (e.g., as a backup device):
Store the device in its original packaging and in the same condition it was de-
livered and check it annually for damage and soiling. Consider the storage pe-
riod in the maintenance cycles.
Note: Please also observe any storage information provided on the packaging.
The following rules apply to the storage of spare parts:
 Apply an appropriate protective agent to assemblies at risk of corrosion.
 If stored correctly, O-rings and gaskets should not be kept longer than 7 years.
 Store the spare parts in the original package until they are used.
Storage, removal, and disposal
Page
80
81
82
80